top of page

Roomba Plus 505 Combo Robot + AutoWash Dock Owner’s Guide

Original source

Resource text

Combo

Robot AutoWash

Dock Roomba ® Plus 505 Owner’s Guide

For more information, visit global.irobot.com2 EN Getting started 1 Remove the foam inserts behind the bumper

2 Install the Edge-Sweeping Brush and Mop Pads

Align the Edge-Sweeping Brush and press down until you hear a click.

3Roomba® Plus 505 Combo Robot + AutoWash™ Dock Owner’s Guide EN 3 Install the Dock Ramp

Install the removable ramp by aligning it with the dock. Press down to snap it into place. 4 Place the dock on hard-surface flooring Good Wi-Fi® coverage 1.6ft (0.5m) on both sides 5ft (1.5m) from stairs 5ft (1.5m) in front NOTE: Do not place it in direct sunlight. Ensure that the area around the dock is free of clutter to improve docking performance. WARNING: To prevent your robot from falling down stairs, ensure that your dock is placed at least 1.5 metres (5 feet) away from stairs.

For more information, visit global.irobot.com4 EN 5 Prepare the Clean Water Tank -MAX- -MAX-

Remove the Clean Water Tank from the dock. Fill the Clean Water Tank (right) with water and a compatible cleaning solution if desired. IMPORTANT: Only certain cleaning solutions can be safely used with your robot. A full list of compatible cleaning solutions can be found on http://answers.irobot.com/s/roomba-combo-cleanser or by visiting the app. Please do not use other cleaning solutions or bleach- based products.

6 Plug in the dock

Plug the power cord into the wall. Wrap the cord back so it won’t get in the way of the robot as it comes and goes.

5Roomba® Plus 505 Combo Robot + AutoWash™ Dock Owner’s Guide EN 7 Wake up the robot Place your robot in front of the dock, then slide it towards the dock, lining up the metal Charging Contacts. After a few minutes, a sound will let you know it’s awake. NOTE: Your robot comes with a partial charge, but we recommend that you charge the robot for up to 4 hours prior to starting the first clean. To remove your robot from the dock, slide the robot towards you and then lift. 8 Download the Roomba® Home App Scan the QR code with the camera on your mobile device or find the Roomba® Home App in your app store. The app will guide you through the steps to set up your robot. Once your robot is set up in the app, you’ll be able to: • Control when, where and how you clean • Create automatic cleaning schedules • Set custom cleaning preferences • Unlock digital features • Access tips, tricks and answers to commonly asked questions IMPORTANT: Read the enclosed safety information guide first before using your robot.

For more information, visit global.irobot.com6 EN 12 13 14 11 8 8 9 10 About your Roomba® Plus 505 Robot Top view 1 Charging Contacts 2 Dock Alignment Guides 3 Debris Evacuation Port 4 LiDar Detector Bumper 5 ClearView™ LiDar 6 Home Button 7 Power Button 8 Robot Top Cover 9 Filter 10 AutoEmpty™ Port or Debris Evacuation Port 11 Bin Release Button 12 Bin 13 Bumper 14 Wall Follow Sensor

7Roomba® Plus 505 Combo Robot + AutoWash™ Dock Owner’s Guide EN Bottom view 15 Wheel 16 Multi-Surface Brush 17 Cliff Sensors 18 Floor Type Sensor 19 Caster Wheel 20 Camera and Illumination LED 21 Mop Pad 22 Mop Pad Plate 23 Mop Pad Extender 24 Brush Cover 25 Brush Cover Release Tab 26 Edge-Sweeping Brush 15 16 17 18 19 20 21 22 24 23 25 26 17 17 17

For more information, visit global.irobot.com8 EN 13 14 16 17 15 19 18 20 21 22 23 24 26 28 30 31 32 33 29 1 25 27 2 12 11 8 9 10 About your AutoWash™ Dock Front view 1 Dirty Water Tank 2 Clean Water Tank 3 Charging Contacts 4 Dock Alignment Guides 5 AutoWash™ Water Inlet 6 AutoWash™ Pad Dry Recess 7 AutoWash™ Water Drain 8 Charging LED Indicator 9 Dirty Water Tank LED Indicator 10 Clean Water Tank LED Indicator 11 Bin Indicator 12 IR Window 13 Debris Bag Storage 14 Extra Debris Bag 15 Debris Bag Guide Rails 16 Cleaning Brush Accessory 17 Debris Evacuation Port 18 Main Debris Cubby 19 Dock Filter 20 Cubby Door

9Roomba® Plus 505 Combo Robot + AutoWash™ Dock Owner’s Guide EN 21 Water Tank Handle 22 Water Tank Lid 23 Water Tank Latch 24 Exhaust Vent 25 Removable Power Cord 26 Cord Attachment 27 Cord Wrap 28 Water Entry Point 29 Dirty Water Float 30 Clean Water Tubing 31 Clean Water Float 32 Removeable Ramp 33 Wheel Track 13 14 16 17 15 19 18 20 21 22 23 24 26 28 30 31 32 33 29 1 25 27 2 12 11 8 9 10 Top viewRear view

For more information, visit global.irobot.com10 EN Charging Power icon indicator

Charging during a cleaning routine Your robot will return to the dock whenever it needs to recharge. Once it is sufficiently charged, it will then resume cleaning where it left off. Standby mode Your robot uses a small amount of power whenever it is on the dock. You can put it in a further-reduced power state when not in use by pressing for 10 seconds. To exit Low Power mode, short-press the button. Storing your robot For long-term storage, turn off your robot by removing it from the dock and holding for 10 seconds. Store in a cool, dry place. Dock charging LED indicators

Solid white: when the robot is fully charged or in the process of charging. While the dock is automatically emptying the bin, during washing or drying cycles, and when the dock is in standby mode. Power button White – Fully charged and connected Flashing white – Return to dock to charge Pulsing white – Charging (low battery). If you try to start cleaning while the robot is charging with low battery, it will display a pulsing white light Flashing red – Low battery/Error On: robot on dock charging Off: robot not on dock, robot not charging or dock is asleep NOTE: Software updates may adjust the actual LED behaviour on the robot and/or dock. Please visit global.irobot.com for the most up-to- date information.

11Roomba® Plus 505 Combo Robot + AutoWash™ Dock Owner’s Guide EN Cleaning Button controls

Dock cleaning LED indicators Solid red: dust bag full, missing or improperly installed Solid red: Dirty Water Tank full, missing or improperly installed Solid red: Clean Water Tank empty, missing or improperly installed Cleaning pattern Your robot will automatically explore and clean your home in neat rows. It will return to the dock at the end of a cleaning routine or whenever it needs to recharge. Tips: • Remove excess clutter from floors before cleaning. • Use your robot frequently to maintain well-conditioned floors. After 90 minutes of inactivity off the dock, your robot will automatically end its clean. If you are unsure if it has finished or paused, visit the Roomba® Home App to check on its status. Spot clean Tap the button twice to spot clean a designated area. After the spot clean is complete, your robot will end the job. Press to send it back to its dock. AutoEmpty™ Your robot will automatically empty its Dust Bin at the end of every cleaning routine. NOTE: It is highly recommended to use the Roomba® Home App for cleaning control. The mobile app can be used to clean specific rooms, set up cleaning routines and create automations/schedules. Home button: Tap to send the robot home Press when running to pause Press when paused to dock Press when docking to stop

Power button: Tap to start/pause/resume a job Hold for 3 seconds to turn on Hold for 10 seconds to turn off NOTE: Roomba® robots are generally designed to be used on most floor types for vacuuming. We do not recommend using mopping functions on unsealed hardwood floors and certain laminate/vinyl planks due to potential water damage to the flooring and/or subfloor. For more info, please visit global.irobot.com.

For more information, visit global.irobot.com12 EN 1 Lift to remove the tank that requires maintenance.

2 Lift the latch on the tank to open. -MAX- 3 Empty the Dirty Tank. Fill the Clean Tank with water. -MAX-

Starting a cleaning routine from your dock If the Clean Water Tank and Dirty Water Tank are ready, skip to step 5. If the Clean Tank or Dirty Tank LED indicators are on:

13Roomba® Plus 505 Combo Robot + AutoWash™ Dock Owner’s Guide EN 4 Close and latch the water tank lids. Place the tanks back on the dock. 5 With the Mop Pads attached, return the robot to the AutoWash™ Dock and use the app or press the button on your robot.

IMPORTANT: Ensure that the latch is properly closed before reinstalling. Pad washing and pad drying Your robot will return to its dock for pad washing as needed during cleaning routines, and then again when cleaning is complete. Pad drying will only take place at the end of its cleaning routine. IMPORTANT: Do not interrupt the robot while pad washing is active. It is normal to hear noises throughout this process as the pads spin and the Pad Washing Basin is filled and drained. Once complete, the dock will proceed to dry the Mop Pads by blowing hot air over them. NOTE: The drying process can last for a few hours. You can choose from different drying times in the app. You may hear a low hum coming from the dock while the dryer is active. Visit the Roomba® Home App to manually start pad washing, start or stop pad drying, or to customise the pad washing settings.

For more information, visit global.irobot.com14 EN Care and maintenance for your robot To keep your robot at optimal performance, make sure that you regularly perform the following basic care and maintenance. There are additional instructional videos in the Roomba® Home App. If you notice your robot picking up less debris from your floor, empty the bin, clean the filter and clean the brushes. PartCare frequencyReplacement frequency* Dust BinClean the bin as needed- Filter Clean once a week (twice a week if you have a pet) Every 3–6 months Edge-Sweeping Brush Clean every 2 weeks or as often as needed Every 3–6 months Multi-Surface BrushClean once a weekEvery 6–12 months Front Caster Wheel Clean every 2 weeks or as often as needed - Charging Contacts Clean every 2 weeks or as often as needed - Sensors Clean once a month or as often as needed - Mop PadAuto cleans after moppingEvery 180 hours of cleaning Brush CoverInspect every 6 monthsReplace if worn or damaged * Replacement frequency may vary. Parts should be replaced if there is any visible wear and tear. If you think you need a replacement part, please contact iRobot Customer Care for more information. Cleaning the Edge-Sweeping Brush Pull to remove the Edge-Sweeping Brush. Remove any hair or debris using the cleaning brush, then reinstall the Edge-Sweeping Brush.

IMPORTANT: It is recommended to replace the Edge-Sweeping Brush every 3–6 months for optimal cleaning performance.

15Roomba® Plus 505 Combo Robot + AutoWash™ Dock Owner’s Guide EN NOTE: For instructions on performing a deeper clean of the Multi-Surface Brush, see global.irobot.com IMPORTANT: It is recommended to replace the Multi-Surface Brush every 6–12 months for an optimal cleaning performance. Cleaning the Multi-Surface Brush NOTE: For instructions on performing a deeper clean of the Multi-Surface Brush, see global.irobot.com IMPORTANT: It is recommended to replace the Multi-Surface Brush every 6–12 months for optimal cleaning performance. 4 Reinstall the Multi-Surface Brush and brush cover in the robot.

1 Press the brush cover release tabs and lift to remove the brush cover.

2 Remove the Multi-Surface Brush.

3 Remove any hair debris from the Multi-Surface Brush using the cleaning brush.

For more information, visit global.irobot.com16 EN 1 Remove the robot top cover by lifting it up.

2 Press the Dust Bin Release Buttons to remove the Dust Bin.

3 Remove the filter.

4 Clean debris from the filter with the cleaning brush.

5 Open the bin door. Empty and clean debris from the Dust Bin and filter with the cleaning brush or a clean cloth. Close the bin door. 6 Reinsert the filter.

Cleaning the filter and bin

17Roomba® Plus 505 Combo Robot + AutoWash™ Dock Owner’s Guide EN IMPORTANT: To achieve optimal performance with your robot and dock, clean and/or replace your robot’s filter as needed. IMPORTANT: The bin is not dishwasher safe. NOTE: If you place your robot on the dock by hand, it will not empty automatically. In this case, use the Roomba® Home App or hold the button down for 2–5 seconds.

7 Place the bin back in the robot.

8 Put the robot top cover back on. Washing the bin 1 Release the bin, remove the filter and open the bin door. 2 Rinse the Dust Bin using warm water. 3 Make sure that the bin is completely dry. Reinsert the filter and place the bin back in the robot.

For more information, visit global.irobot.com18 EN Cleaning the Front Caster Wheel Use the cleaning brush to remove hair and debris from the Front Caster Wheel. Cleaning the Charging Contacts, sensors and camera window Remove the robot from the dock and wipe the Charging Contacts and sensors with a clean, dry cloth or lightly dampened melamine foam.

CHARGING CONTACTS SENSORS

IMPORTANT: A front wheel clogged with hair and debris could result in damage to your floor. If the wheel is not spinning freely after you have cleaned it, please contact Customer Care. IMPORTANT: Do not spray cleaning solution or water onto the sensors or sensor openings.

19Roomba® Plus 505 Combo Robot + AutoWash™ Dock Owner’s Guide EN Care and maintenance for your dock To keep your dock running at optimal performance, perform the procedures on the following pages. PartCare frequencyReplacement frequency* Charging ContactsClean once a month- SensorsClean once a month- IR WindowClean once a month- Bags- Bags should be replaced when full, prompted by the LED indicator on the dock and/or Roomba® Home App Clean TankRinse and refresh water as needed- Dirty TankRinse and empty as needed- Pad Washing Basin, Liquid Overflow Basin Clean if visibly dirty, once a month- RampClean if visibly dirty- * Replacement frequency may vary. Parts should be replaced if there is any visible wear and tear. If you think you need a replacement part, please contact iRobot Customer Care for more information. Cleaning the pad washing system 1 Wipe out the Pad Washing Basin with a clean, dry cloth. Ensure that there are no obstructions in the drainage port. Mild soap and a sponge may be used for stubborn debris.

For more information, visit global.irobot.com20 EN 1 Pull the Cubby Door towards you and up to remove it.

2 Slide the card out. When pulled, the bag will self- seal so dust and debris cannot escape. 3 Install a new bag by sliding the card into the guide rails. 4 Replace the Cubby Door. Make sure that it’s correctly aligned. Replacing the bag

21Roomba® Plus 505 Combo Robot + AutoWash™ Dock Owner’s Guide EN Cleaning the Charging Contacts and IR Window Inspect the components to make sure that they are clear of debris. Wipe with a clean, dry cloth.

IMPORTANT: Do not spray cleaning solution or water onto the sensors or sensor openings. Removing debris from the dock filter Inspect the dock filter for any lint or debris build-up and wipe it with a clean, dry cloth to remove.

IR WINDOW CHARGING CONTACTS

For more information, visit global.irobot.com22 EN 1 Remove both water tanks.

2 Lift the latch on the water tanks to open. -MAX-

3 Empty the Dirty Water Tank.

Washing the water tanks

23Roomba® Plus 505 Combo Robot + AutoWash™ Dock Owner’s Guide EN 4 Rinse both water tanks using warm water. Mild soap and a sponge may be used for stubborn debris. -MAX- 5 Refill the Clean Water Tank with water. Leave the Dirty Water Tank empty. -MAX- -MAX-

6 Reinsert both water tanks.

IMPORTANT: Water tanks are not dishwasher safe. IMPORTANT: Ensure that the latch is properly closed on the water tanks before reinstalling them.

For more information, visit global.irobot.com24 EN Troubleshooting Troubleshooting your robot Your robot will alert you if something is wrong with a voice announcement or audio alert. The Roomba® Home App will also provide notifications with steps to troubleshoot any issues. If you are unsure if the robot has finished or paused, consult the Roomba® Home App to check on its status. Factory reset To factory reset, press for 5 seconds, then (within 5 seconds) press and for 5 seconds. BATTERY SAFETY AND POSTAGE WARNING: Lithium-ion batteries and products that contain lithium-ion batteries are subject to strict transportation regulations. If you need to post this product for service, travel or any other reason, you MUST follow the below postage instructions. • Battery MUST be turned off before posting. • Turn off the battery by removing the robot from the dock and holding down the button for 10 seconds. Press the bumper in for 10 seconds while holding the button. All indicators will then turn off. • Package the robot securely for postage. If you need further assistance, please visit your Roomba® Home App, contact our Customer Care team or visit global.irobot.com. Troubleshooting your dock Your dock will tell you if something is wrong via LED indicators on the front of the canister and through the Roomba® Home App. If the dock is not performing as expected, check the Roomba® Home App for errors. LED indicatorCommon errorHow to fix Solid red Bag full or missing Replace the bag if it is full or missing. Make sure that the bag is securely inserted. If the problem persists, remove any debris from the port on the bottom of your robot and dock. This product has been equipped with a thermal protector designed to protect against damage due to overheating. If the protector operates, the motor will stop running. If this happens, unplug the unit, allow it to cool for 30 minutes, clear any obstructions from the evacuation port and evacuation tube, then plug the unit back in.

Need further assistance? We’re here to help. Download the Roomba® Home App or visit global.irobot.com for product support or to contact your local support centre. If you need further assistance in the US and Canada, call the US Customer Care team on (877) 855-8593. iRobot USA Customer Care hours Monday to Friday, 9 AM–9 PM Eastern Time Saturday and Sunday 9 AM–6 PM Eastern Time 4856861 vA WC# 4856861 vA Safety information Please see the safety guide that came with your robot or visit global.irobot.com

©2025 iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730, USA. All rights reserved. iRobot, Roomba and Roomba Combo are registered trademarks of iRobot Corporation. AutoEmpty and AutoWash are trademarks of iRobot Corporation. Wi-Fi and the Wi-Fi logo are registered trademarks of Wi-Fi Alliance. Apple and App Store are trademarks of Apple Inc., registered in the U.S. and other countries. Google Play is a trademark of Google LLC.

©️ All Rights Reserved RAR Group 2026 

RAR Now Part of Smartrobotix Group logo

Start & Rent

Home
Rent

Accessories

Marketplace

Commercial

​Gift Card

​

RAR OS

RAR OS IV (Overview)

RAR OS III

Blackbox & R2 chip

Plans & Account
MyRAR

RAR One

RAR Pass

RAR All-In

​​

RAR For

Students

Businesses

Non-profits

Startups

Company

About

Environment

Newsroom

Contact

Responsibility

​

Brands

You

Market

Casa

Pludo

Payment methods accepted by RAR: Pay later services, digital wallets, international payment providers, global payment providers, RAR Pay, and more.
  • Youtube
  • TikTok
  • facebook
  • instagram
  • LinkedIn
  • X
  • Threads

©️® All Rights Reserved RAR Group 2019-2026

GDPR         Cookies        Partner Agreement        Accessibility        Terms

Rent Anything

bottom of page