Roomba 105 Vac and Combo + AutoEmpty Dock Owner's Guide
Resource text
VacCombo
robot(s) Auto Empty dock Roomba ® 105 Owner’s Guide
For more information, visit global.irobot.com2 EN Getting started 1 Remove protective film from camera and foam inserts behind bumper 2 Place the dock on hard-surface flooring Good Wi-Fi® coverage 0.5 m (1.6 ft) both sides 1.5 m (5ft) from stairs 1.5 m (5ft) in front NOTE: Do not place it in direct sunlight. Ensure that the area around the dock is free of clutter to improve docking performance. WARNING: To prevent the risk of your robot falling down stairs, ensure that your dock is placed at least 1.5 metres (5 feet) away from stairs.
3Roomba® 105 Vac | Combo robot + AutoEmpty™ dock Owner’s Guide EN 3 Plug in the dock
Plug the power cord into the wall. Wrap the cord back so it won’t get in the way of the robot as it comes and goes. 4 Install the Edge-Sweeping Brush
Align the Edge-Sweeping Brush and press down until you hear a click.
For more information, visit global.irobot.com4 EN 5 Wake up the robot Place your robot in front of the dock, then slide it towards the dock, lining up the metal charging contacts. After a few minutes, a sound will let you know it’s awake. NOTE: Your robot comes with a partial charge, but we recommend that you charge the robot for 4 hours prior to starting the first cleaning job. To remove your robot from the dock, slide the robot towards you and then lift. 6 Download the Roomba® Home App Scan the QR code with the camera on your mobile device or find the Roomba® Home App in your app store. The app will guide you through the steps to set up your robot. Once your robot is set up in the app, you’ll be able to: • Control when, where and how you clean • Create automatic cleaning schedules • Set custom cleaning preferences • Unlock digital features • Access to tips, tricks and answers to commonly asked questions NOTE: 2.4 GHz Wi-Fi must be used. IMPORTANT: Read the enclosed safety information guide first before using your robot.
5Roomba® 105 Vac | Combo robot + AutoEmpty™ dock Owner’s Guide EN 12 13 14 15 16 6 14 14 17 17 18 19 20 21 22 8 9 10 11 About your Roomba® 105 + AutoEmpty™ Robot Top viewBottom view 1 LiDAR Detector Bumper 2 ClearView™ LiDar 3 Filter 4 Bin Cover 5 Water Tank Cap (combo models only) 6 Bin Release Button 7 Bin 8 Debris Evacuation Port 9 Power Button 10 Home Button 11 Bumper 12 Charging contacts 13 Pad Plate (combo models only) 14 Cliff Sensors 15 Carpet Sensor (combo models only) 16 Edge-Sweeping Brush 17 Brush Cover Release Tab 18 Brush Cover 19 Multi-Surface Brush 20 Caster wheel 21 Wheels 22 Pad Plate Attachment (combo models only)
For more information, visit global.irobot.com6 EN About your AutoEmpty™ Dock Front view 8 9 1 Canister Lid 2 LED indicator 3 Charging Contact 4 Debris Evacuation Port 5 Exhaust Vent 6 IR window Top view 7 Bag Guide Rails 8 Cleaning Brush Accessory 9 Dock filter
7Roomba® 105 Vac | Combo robot + AutoEmpty™ dock Owner’s Guide EN Charging Power icon indicator
Dock LED indicator
Charging during a cleaning routine Your robot will return to the dock whenever it needs to recharge. Once it is sufficiently charged, it will then resume cleaning where it left off. Standby mode Your robot uses a small amount of power whenever it is on the dock. You can put it in a further-reduced power state when not in use by pressing for 10 seconds. To exit Low Power mode, short press the button. Storing your robot For long-term storage, turn off your robot by removing it from the dock and holding for 10 seconds. Store in a cool, dry place. Solid White: fully charged, charging Pulsing White: robot on dock Flashing White: update in progress Solid Red: bag full or not installed POWER Button White - Fully charged and connected Flashing White - Return to dock to charge Pulsing White - Charging (low battery) - If the user tries to start a mission, the buttons will then flash red and trigger an audio telling users it can’t start due to low battery. Flashing Red - Low battery/Error
For more information, visit global.irobot.com8 EN Cleaning Button controls
Cleaning pattern Your robot will automatically explore and clean your home in neat rows. It will return to the dock at the end of a cleaning routine whenever it needs to recharge. Tips: • Remove excess clutter from floors before cleaning. • Use your robot frequently to maintain well-conditioned floors. After 90 minutes of inactivity off the dock, your robot will automatically end its cleaning. If you are unsure if it is finished or paused, visit the Roomba® Home App to check on its status. Spot clean Tap the button twice to spot clean a designated area. After the spot clean is complete, your robot will end the job. Press to send it back to its dock. AutoEmpty™ Your robot will automatically attempt to empty its Dust Bin every time it returns to its AutoEmpty™ dock or is physically placed on the AutoEmpty™ dock. NOTE: It is highly recommended to use the Roomba® Home App for cleaning control. The mobile app can be used to clean specific rooms, set up cleaning routines and create automations/schedules. Home button: Tap to send the robot home Press when running to pause Press when paused to dock Press when docking to stop
Power button: Tap to start/pause/resume a job Hold for 3 seconds to turn on Hold for 10 seconds to turn off NOTE: Roomba® robots are generally designed to be used on most floor types for vacuuming. We do not recommend using mopping functions on unsealed hardwood floors and certain laminate/vinyl planks due to potential water damage to the flooring and/or subfloor. For more info, please visit global.irobot.com.
9Roomba® 105 Vac | Combo robot + AutoEmpty™ dock Owner’s Guide EN Vacuuming only 1 Empty the Dust Bin and water tank (combo models only).
2 Detach the mop pad plate and mop pad (combo models only). 3 To start cleaning, place the robot back on the dock and use the app or press the button. Vacuuming and mopping (combo models only) Your robot is able to both vacuum and mop at the same time when the mopping pad plate and mop pad are installed. Your robot will automatically avoid carpets in vac and mop or mop-only cleaning modes when the water tank and mop pad are installed. IMPORTANT: Do not add liquids such as hot water, detergent or disinfectant as these could damage the robot. Only use cold water or iRobot-approved cleaning solution as shown on our support site at global.irobot.com. After completing your mopping and vacuum cleaning, make sure that you empty the water tank and replace the mop pad. 1 Press the bin release buttons to remove the bin.
105 Combo AE NOTE: It is recommended to clean the Dust Bin at least once a week. Otherwise, the performance of the vacuum-mop may be reduced.
For more information, visit global.irobot.com10 EN 2 Remove the pad plate from the bin.
3 Lightly dampen the mop pad and attach it to the pad plate. 4 Reinstall the pad plate on the bin.
5 Fill the tank with water. 6 Place the bin back in the robot.
7 Place robot back on the dock and use the app or the robot’s buttons to start cleaning.
NOTE: If your robot needs water in the middle of a job, tap the button to pause. Remove the bin and add water. Reinstall the bin and press the button again to resume.
11Roomba® 105 Vac | Combo robot + AutoEmpty™ dock Owner’s Guide EN Care and maintenance for your robot To keep your robot at optimal performance, make sure that you regularly perform the following basic care and maintenance. There are additional instructional videos in the Roomba® Home App. If you notice your robot picking up less debris from your floor, empty the bin, clean the filter and clean the brushes. PartCare frequencyReplacement frequency* Dust BinEmpty bin as needed- Water tank (combo models only) Empty after each job- Filter Clean once a week (twice a week if you have a pet) Every 3–6 months Edge-Sweeping Brush Clean every 2 weeks or as often as needed Every 3–6 months Multi-Surface BrushClean once a weekEvery 6–12 months Front caster wheel Clean every 2 weeks or as often as needed - Charging contacts Clean every 2 weeks or as often as needed - Sensors Clean once a month or as often as needed - Mop pad (combo models only) Clean after mopping Every 3–6 months. Dispose in household waste when no longer usable Brush coverInspect every six monthsReplace if worn or damaged * Replacement frequency may vary. Parts should be replaced if there is any visible wear and tear. If you think you need a replacement part, please contact iRobot Customer Care for more information. Cleaning the Edge-Sweeping Brush Pull to remove the Edge-Sweeping Brush. Remove any hair or debris using the cleaning brush, then reinstall the Edge-Sweeping Brush.
IMPORTANT: It is recommended to replace the Edge-Sweeping Brush every 3–6 months for optimal cleaning.
For more information, visit global.irobot.com12 EN 4 Reinstall the Multi-Surface Brush and brush cover in the robot.
Cleaning the Multi-Surface Brush NOTE: For instructions to perform a deeper cleaning of the Multi-Surface Brush, see global.irobot.com IMPORTANT: It is recommended to replace the main brush every 6–12 months for an optimal cleaning effect. 1 Press the brush cover release tabs and lift to remove the brush cover.
2 Remove the Multi-Surface Brush.
3 Remove any hair debris from the Multi-Surface Brush using the cleaning brush.
13Roomba® 105 Vac | Combo robot + AutoEmpty™ dock Owner’s Guide EN Cleaning the front caster wheel Use the cleaning brush to remove hair and debris from the front caster wheel. Cleaning the charging contacts and sensors Wipe the charging contacts and sensors with a clean, dry cloth or lightly dampened melamine foam.
CHARGING CONTACTS SENSORS
IMPORTANT: A front wheel clogged with hair and debris could result in damage to your floor. If the wheel is not spinning freely after you have cleaned it, please contact Customer Care. IMPORTANT: Do not spray cleaning solution or water onto the sensors or sensor openings.
For more information, visit global.irobot.com14 EN Emptying the bin 1 Press the Dust Bin Release Buttons to remove the Dust Bin. 2 Open the door to empty and clean the Dust Bin with the cleaning brush. 3 Place the bin back in the robot. IMPORTANT: Do not rinse or soak the bin. Cleaning the filter 1 Remove the bin. Open the bin door and remove the filter. 2 Remove debris with the cleaning brush. 3 Wipe the bin with a clean cloth. 4 Reinsert the filter. Place the bin back in the robot. Cleaning the mop pad Thoroughly hand wash the mop pad with cold water and let it air dry.
15Roomba® 105 Vac | Combo robot + AutoEmpty™ dock Owner’s Guide EN Care and maintenance for your dock To keep your dock running at optimal performance, perform the procedures on the following pages. PartCare frequencyReplacement frequency* Charging contactsOnce every month- SensorsClean once a month- IR windowClean once a month- Bags- Bags should be replaced when full, prompted by the LED indicator on the dock and/or Roomba® Home App Dock filter Once every month (remove debris from the dock filter) * Replacement frequency may vary. Parts should be replaced if there is any visible wear and tear. If you think you need a replacement part, please contact iRobot Customer Care for more information. Cleaning the charging contacts and IR window Inspect the components to make sure that they are clear of debris. Wipe with a clean, dry cloth. IMPORTANT: Do not spray cleaning solution or water onto the sensors or sensor openings.
For more information, visit global.irobot.com16 EN 1 Lift up on the canister lid to open. 2 Pull up on the card to remove the bag from the canister. 3 Install a new bag by sliding the card into the guide rails. This will seal the bag so dust and debris cannot escape. 4 Press down on the lid, making sure that it is completely closed.
IMPORTANT: To achieve optimal performance with your robot and dock, clean and/or replace your robot’s filter as needed.
Replacing the bag
17Roomba® 105 Vac | Combo robot + AutoEmpty™ dock Owner’s Guide EN Removing debris from dock filter Inspect the blower cover for any lint or debris build-up and wipe with a clean, dry cloth to remove.
For more information, visit global.irobot.com18 EN Troubleshooting Troubleshooting your robot Your robot will alert you if something is wrong with a voice announcement or audio alert. The Roomba® Home App will also provide notifications with steps to troubleshoot any issues. If you are unsure if the robot is finished or paused, consult the Roomba® Home app to check on its status. Factory Reset To factory reset, press for 5 seconds and then (within 5 seconds) press and for 5 seconds. BATTERY SAFETY AND POSTAGE WARNING: Lithium-ion batteries and products that contain lithium-ion batteries are subject to strict transportation regulations. If you need to post this product for service, travel or any other reason, you MUST follow the below postage instructions. • Battery MUST be turned off before posting. • Turn off the battery by removing the robot from the dock and holding down the button for 10 seconds. Press the bumper in for 10 seconds while holding the button. All indicators will then turn off. • Package the robot securely for postage. If you need further assistance, please visit your Roomba® Home app, contact our Customer Care team or visit global.irobot.com. Troubleshooting your dock Your dock will tell you if something is wrong via an LED indicator on the front of the canister and through the Roomba® Home App. If the dock is not performing as expected, check the Roomba® Home app for errors. LED indicatorCommon errorHow to fix Solid red Bag full or missing Replace the bag if it is full or missing. Make sure that the bag is securely inserted. If the problem persists, remove any debris from the port on the bottom of your robot and dock. This product has been equipped with a thermal protector designed to protect against damage due to overheating. If the protector operates, the motor will stop running. If this happens, unplug the unit, allow it to cool for 30 minutes, clear any obstructions from the evacuation port and evacuation tube, then plug the unit back in.
Need further assistance? We’re here to help. Download the Roomba® Home App or visit global.irobot.com for product support or to contact your local support centre. If you need further assistance in the US & Canada, call the US Customer Care team at (877) 855-8593.
iRobot USA Customer Care hours Monday to Friday, 9 AM–9 PM Eastern Time Saturday and Sunday 9 AM–6 PM Eastern Time Safety Information Please see the safety guide that came with your robot or visit global.irobot.com 4856829 vA WC# 4856829 vA
©2025 iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730, USA. All rights reserved. iRobot, Roomba and Roomba Combo are registered trademarks of iRobot Corporation. DustCompactor is a trademark of iRobot Corporation. Wi-Fi and the Wi-Fi logo are registered trademarks of Wi-Fi Alliance. Apple and App Store are trademarks of Apple Inc., registered in the U.S. and other countries. Google Play is a trademark of Google LLC.
